Premium matte vinyl, precision-cut and peel-and-stick. No heat, no hairdryer, nothing beyond the squeegee in the box — and if you ever want a redo, it lifts off clean with no residue.
Power down and unbox your skin and squeegee. Wipe the top panel until it's clean and completely dry with the microfiber cloth — a little isopropyl alcohol lifts stubborn dust. Nothing should sit under the vinyl.
Peel the skin off its backing. Hover it above the device first and line the cutouts up with your knobs, pads and screen — then lay it straight down, starting from one edge.
Press it down everywhere with the squeegee, smoothing from the centre outward so it grips edge to edge. Give the borders and cutout edges one extra pass. That's it — you're done.
Apply at room temperature. Cold vinyl goes stiff; hot vinyl stretches.
If it lifts or shifts, peel gently and re-lay it. The adhesive forgives a second try.
Peel slowly from a corner. No residue, no damage to your gear.
Push it toward the nearest edge with the squeegee. If it won’t move, lift that corner of the skin, let the air out, and lay it back down.
Peel back slowly from the closest edge — not the whole sheet — realign against the screen cutout, and re-lay. Don’t pull the vinyl tight to make it reach.
Usually dust or a fingerprint under that edge. Lift it, wipe the panel there with the cloth, and squeegee it back down firmly.
Send a photo to elektronskins@gmail.com and we'll walk you through it — or replace the skin if it's on us.
Printed and packed by hand in the USA · free US shipping · 30-day fit guarantee.